MERCURY V6 4.3L MPI INBOARD ENGINE IN A CRATE

Unknown year Model
721 hrs
Comes with a Seaworthy report conducted before being removed
Starboard Engine, Was a Twin engine setup before being removed for a larger horsepower Replacement.
Comes with everything to get it back into a Hull and out on the water.
SOLD AS IS

Key Features and Specifications:

Type: V6 petrol engine.
Rated HP: 220.
Displacement: 4.3 liters (262 cubic inches).
Fuel Delivery: Multi-point electronic fuel injection (MPI).
Ignition: Crank fired high voltage switch with knock control.
Weight: 353 kg (dry weight).
Bore x Stroke: 101.6 x 88.4mm.
Compression Ratio: 9.4:1.
Maximum RPM (WOT): 4400-4800.
Fuel Requirement: Unleaded 91 RON minimum (equivalent to 92 RON in Australia).
Cooling System: Raw water, thermostatically controlled.
Alternator: 65 amp/917 watt.
Standard Features: Power steering, serpentine belt, remote oil filter, seawater cooling drain system.
Engine Guardian System: Alerts to high coolant temperature, low drive lubricant, low oil pressure, and low voltage.

Lloyds stock #996753+1
Location #MACKAY
#MMR

Location of item: Yard 3/263 Connors Road, Paget, QLD, Australia

This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.

** This vendor is not registered for GST - therefore GST is not applicable on this asset **

As Standard Auction Practice all Vehicles are Sold Unregistered and without plates

Buyer is responsible for the safe removal of asset

ENQUIRIES: Contact our Machinery team directly on 0489 996 390 or [email protected] for all enquiries.

(This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications, and any condition reports should be used as a guide only and have been compiled after speaking with the owners. The photos are current as at time of book-in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling-off period.)