- 20ft Shipping Container -
Container Details
Owner's Number: SCFU 224690 5
Container ID: 22G1
Manufacturer: ZSJC (Identification No. ZSJC 4036484)
Type: SS401-00-B00
Key Specifications
Dimensions: 20 feet standard shipping container
Cubic Capacity: 33.2 cubic metres (1,173 cubic feet)
Maximum Gross Mass: 30,480 kg (67,200 lbs)
Tare Weight: 2,180 kg (4,800 lbs)
Payload Capacity: 28,300 kg (62,570 lbs)
Allowable Stacking Load (1.85G): 216,000 kg (476,190 lbs)
Transverse Racking Test Force: 150,000 newtons
Certification & Compliance
CSC Safety Approval: F/BV/16703
Approved for Transport Under Customs Seal: GB/C 20448 BV/2022
Timber Component Treatment: IM/TAILILLEUM 400/2024
Date Manufactured: 10/2021
First Maintenance Examination Date: 10/2029
Condition
Ex-use industrial container. Structurally sound and fully functional. Container shows typical wear consistent with commercial shipping use. Exterior painted in SCF corporate colours (orange and charcoal). All locking mechanisms operational. Doors open and close smoothly. Interior flooring intact with minor surface wear visible in photographs. No structural damage, rust perforation, or water ingress observed. .
Included
Container as photographed with all original hardware, locking bars, and door seals intact.
Condition Notes
The container has been in commercial use and shows appropriate cosmetic wear on the flooring and exterior surfaces. All structural elements are sound. The container is approved for international transport under customs seal and meets all ISO 668 standards for 20-foot containers. Suitable for storage, on-site office conversion, or continued logistics use.
Pickup only. Buyer responsible for collection and transport. Container is stationary and requires appropriate lifting equipment (forklift or crane) for removal. Inspection by appointment prior to bidding strongly recommended.
Sold as described. No warranty implied.
Location of item: 504 Stuart HWY, Winnellie, NT, Australia
This item is being offered PICK UP ONLY. Local collection is available, if shipping is required, bidders are encouraged to organise their own freight.
Thinking of financing? Get pre-auction finance ready with Lloyds - Click here & speak to our team today!
As Standard Auction Practice all Vehicles are Sold Unregistered and without plates
Buyer is responsible for the safe removal of asset
ENQUIRIES: Contact our Machinery team directly on 0489 996 390 or [email protected] for all enquiries.
(This asset is sold under standard auction conditions, as is, where is. All photos, descriptions, odometer readings, hour readings, engine specifications, and any condition reports should be used as a guide only and have been compiled after speaking with the owners. The photos are current as at time of book-in. Lloyds do not knowingly sell faulty goods. Inspection is highly recommended prior to sale & is the responsibility of the bidder. There is no warranty & no cooling-off period.)